88

All trademarks are property of their respective owners.

www.pericom.com

06/30/15

PI6CDBL402B

4 -Output Low Power PCIE GEN 1-2-3 Buffer

o

C; VDD = 3.3V+/-10%; VDDO =

3.3V+/-10%, VDDO = 2.5V+/-10%, VDDO = 1.8V+/-10%, See Test Loads for Loading Conditions)

Symbol Parameters

Condition

Min.

Type Max. Units

V

IHDIF

Differential inputs

(single-ended measurement)

600

800

1150

mV

V

ILDOF

Differential inputs

(single-ended measurement)

V

300

0

300

mV

V

COM

Input Common Mode Voltage -

Common Mode Input Voltage

300

725

mV

V

SWING

Peak to Peak value (V

300

1450

mV

dv/dt

Measured differentially

0.4

V/ns

I

IN

V

-5

5

uA

d

tin

Measurement from differential wave-

from

45

55

%

J

DIFIn

Differential Measurement

0

150

ps

Note:

1. Guaranteed by design and characterization, not 100% tested in production.

2. Slew rate measured through +/-75mV window centered around differential zero

3. The device can be driven from a single ended clock by driving the true clock and biasing the complement clock input to the VBIAS, where VBIAS is (VIH-

HIGH - VIHLOW)/2

Supply Voltage to Ground Potential......................................................4.6V

Ambient Operating Temperature........................................... -40 to +85°C

Storage Temperature.......................................................... –65°C to +150°C

Junction Temperature .......................................................................... 125°C

Soldering Temperature.........................................................................260°C

ESD Protection (Input) ...........................................................2000V(HBM)

Note: Stresses greater than those listed under MAXIMUM RAT-

INGS may cause permanent damage to the device. This is a stress

rating only and functional operation of the device at these or any

other conditions above those indicated in the operational sections

of this specification is not implied. Exposure to absolute maximum

rating conditions for extended periods may affect reliability.

Maximum Ratings

(Above which useful life may be impaired. For user guidelines, not tested.)

15-0083