STM32F303VE datasheet(28/184 Pages) STMICROELECTRONICS

28 / 184 page

Functional overview

STM32F303xD STM32F303xE

28/184

DocID026415 Rev 4

The RTC is an independent BCD timer/counter. It supports the following features:

•

Calendar with subsecond, seconds, minutes, hours (12 or 24 format), week day, date,

month, year, in BCD (binary-coded decimal) format.

•

Reference clock detection: a more precise second source clock (50 or 60 Hz) can be

used to enhance the calendar precision.

•

Automatic correction for 28, 29 (leap year), 30 and 31 days of the month.

•

Two programmable alarms with wake up from Stop and Standby mode capability.

•

On-the-fly correction from 1 to 32767 RTC clock pulses. This can be used to

synchronize it with a master clock.

•

Digital calibration circuit with 1 ppm resolution, to compensate for quartz crystal

inaccuracy.

•

Three anti-tamper detection pins with programmable filter. The MCU can be woken up

from Stop and Standby modes on tamper event detection.

•

Timestamp feature which can be used to save the calendar content. This function can

be triggered by an event on the timestamp pin, or by a tamper event. The MCU can be

woken up from Stop and Standby modes on timestamp event detection.

•

17-bit Auto-reload counter for periodic interrupt with wakeup from STOP/STANDBY

capability.

The RTC clock sources can be:

•

A 32.768 kHz external crystal

•

A resonator or oscillator

•

The internal low-power RC oscillator (typical frequency of 40 kHz)

•

The high-speed external clock divided by 32.

3.20

Inter-integrated circuit interface (I2C)

Up to three I2C bus interfaces can operate in multimaster and slave modes. They can

support standard (up to 100 kHz), fast (up to 400 kHz) and fast mode + (up to 1 MHz)

modes.

All I2C bus interfaces support 7-bit and 10-bit addressing modes, multiple 7-bit slave

addresses (2 addresses, 1 with configurable mask). They also include programmable

analog and digital noise filters.

Table 6. Comparison of I2C analog and digital filters

Analog filter

Digital filter

Pulse width of

suppressed spikes

≥ 50 ns

Programmable length from 1 to 15

I2C peripheral clocks

Benefits

Available in Stop mode

1. Extra filtering capability vs.

standard requirements.

2. Stable length

Drawbacks

Variations depending on

temperature, voltage, process

Wakeup from Stop on address

match is not available when digital

filter is enabled.

STM32F303VE bảng dữ liệu(PDF) 28 Page - STMicroelectronics

STM32F303VE bảng dữ liệu(HTML) 28 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL