C164CL datasheet(49/79 Pages) INFINEON

49 / 79 page

C164CI/SI

C164CL/SL

Data Sheet

V2.0, 2001-05

Table 10

Current Limits for Port Output Drivers

Port Output Driver

Mode

Maximum Output Current

(

IOLmax, -IOHmax)

Nominal Output Current

(

IOLnom, -IOHnom)

Strong driver

10 mA

2.5 mA

Medium driver

4.0 mA

1.0 mA

Weak driver

0.5 mA

0.1 mA

1) An output current above |I

OXnom| may be drawn from up to three pins at the same time.

For any group of 16 neighboring port output pins the total output current in each direction (

ΣIOL and Σ-IOH)

must remain below 50 mA.

2) The current ROM-version of the C164CI (step Ax) is equipped with port drivers, which provide reduced driving

capability and reduced control. Please refer to the actual errata sheet for details.

Power Consumption C164CI (ROM)

(Operating Conditions apply)

Parameter

Sym-

bol

Limit Values

Unit Test

Conditions

min.

max.

Power supply current (active)

with all peripherals active

IDD

–

1 +

2.5

× fCPU

RSTIN =

VIL

fCPU in [MHz]

1) The supply current is a function of the operating frequency. This dependency is illustrated in Figure 9.

These parameters are tested at

VDDmax and maximum CPU clock with all outputs disconnected and all inputs

VIL or VIH.

Idle mode supply current

with all peripherals active

IIDX

–

1 +

1.1

× fCPU

RSTIN =

VIH1

fCPU in [MHz]

Idle mode supply current

with all peripherals deactivated,

PLL off, SDD factor = 32

IIDO

2) This parameter is determined mainly by the current consumed by the oscillator (see Figure 8). This current,

however, is influenced by the external oscillator circuitry (crystal, capacitors). The values given refer to a typical

circuitry and may change in case of a not optimized external oscillator circuitry.

–

500 +

× fOSC

µARSTIN = VIH1

fOSC in [MHz]

Sleep and Power-down mode

supply current with RTC running

IPDR

2) –

200 +

× fOSC

µA

VDD = VDDmax

fOSC in [MHz]

3) This parameter is tested including leakage currents. All inputs (including pins configured as inputs) at 0 V to

0.1 V or at

VDD - 0.1 V to VDD, VREF = 0 V, all outputs (including pins configured as outputs) disconnected.

Sleep and Power-down mode

supply current with RTC disabled

IPDO

–

µA

VDD = VDDmax

C164CL bảng dữ liệu(PDF) 49 Page - Infineon Technologies AG

C164CL bảng dữ liệu(HTML) 49 Page - Infineon Technologies AG

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79

bảng dữ liệu tải về

Link URL