R5973D datasheet(19/39 Pages) STMICROELECTRONICS

19 / 39 page

DocID026876 Rev 1

19/39

R5973D

Closing the loop

Similarly for ALC the poles can usually be defined as a double pole whose value is:

Equation 11

7.3

PWM comparator

The PWM gain is given by the following formula:

Equation 12

where VOSCMAX is the maximum value of a sawtooth waveform and VOSCMIN is the

minimum value. A voltage feed-forward is implemented to ensure a constant GPWM. This is

obtained by generating a sawtooth waveform directly proportional to the input voltage VCC.

Equation 13

Where K is equal to 0.076. Therefore the PWM gain is also equal to:

Equation 14

This means that even if the input voltage changes, the error amplifier does not change its

value to keep the loop in regulation, thus ensuring a better line regulation and line transient

response.

In summary, the open loop gain can be expressed as:

Equation 15

Example 1

Considering RC = 2.7 k, CC = 22 nF and CP = 220 pF, the poles and zeroes of A0 are:

FP1 = 9 Hz

FP2 = 256 kHz

FZ1 = 2.68 kHz

If L = 22 µH, COUT = 100 µF and ESR = 80 m, the poles and zeroes of ALC become:

FPLC = 3.39 kHz

F0 = 19.89 kHz

Finally R1 = 5.6 k and R2 = 3.3 k.

FPLC





LCOUT



----------------------------------------------

GPWM s



Vcc

VOSCMAX VOSCMIN

–



-------------------------------------------------------------

VOSCMAX VOSCMIN

–

KVCC



GPWM s



----

const



GPWM s



R1 R2

--------------------



AO s





ALC





R5973D bảng dữ liệu(PDF) 19 Page - STMicroelectronics

R5973D bảng dữ liệu(HTML) 19 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39

bảng dữ liệu tải về

Link URL