LAN9730 datasheet(178/222 Pages) MICROCHIP

178 / 222 page

LAN9730/LAN9730i

DS00001946A-page 178

 2012-2015 Microchip Technology Inc.

6.4.13

CHECKSUM OFFLOAD ENGINE CONTROL REGISTER (COE_CR)

This register controls the RX and TX checksum offload engines.

Address:

130h

Size:

32 bits

Bits

Description

Type

Default

31:17

RESERVED

TX Checksum Offload Engine Enable (TX_COE_EN)

TX_COE_EN may only be changed if the TX path is disabled. If it is desired to

change this value during run time, it is safe to do so only after the MAC is dis-

abled and the TLI is empty.

0 = The TXCOE is bypassed.

1 = The TXCOE is enabled.

R/W

15:2

RESERVED

RX Checksum Offload Engine Mode (RX_COE_MODE)

This register indicates whether the COE will check for VLAN tags or a SNAP

header prior to beginning its checksum calculation. In its default mode, the

calculation will always begin 14 bytes into the frame.

RX_COE_MODE may only be changed if the RX path is disabled. If it is

desired to change this value during run time, it is safe to do so only after the

MAC is disabled and the TLI is empty.

0 = Begin checksum calculation after first 14 bytes of Ethernet Frame.

1 = Begin checksum calculation at start of L3 packet by adjusting for VLAN

tags and/or SNAP header.

R/W

RX Checksum Offload Engine Enable (RX_COE_EN)

RX_COE_EN may only be changed if the RX path is disabled. If it is desired

to change this value during run time, it is safe to do so only after the MAC is

disabled and the TLI is empty.

0 = The RXCOE is bypassed.

1 = The RXCOE is enabled.

R/W

LAN9730 bảng dữ liệu(PDF) 178 Page - Microchip Technology

LAN9730 bảng dữ liệu(HTML) 178 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL