| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
LAN9730 bảng dữ liệu(PDF) 36 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
LAN9730 bảng dữ liệu(HTML) 36 Page - Microchip Technology |
|
36 / 222 page ![]() LAN9730/LAN9730i DS00001946A-page 36 2012-2015 Microchip Technology Inc. Note 4-2 Value is loaded from EEPROM, but must be equal to the default value in order to comply with the USB 2.0 Specification and provide for normal device operation. Specification of any other value will result in unwanted behavior and untoward operation. Note 4-3 Default value is dependent on device release. The MSB matches the device release and the LSB is hardcoded to 00h. The initial release value is 01h. 4.3.1.6.2 Configuration Descriptor The Configuration Descriptor is initialized based on values stored in EEPROM. Table 4-5 shows the default Configura- tion Descriptor values. Note 4-4 Value is loaded from EEPROM, but must be equal to the default value in order to comply with the USB 2.0 Specification and provide for normal device operation. Specification of any other value will result in unwanted behavior and untoward operation. Note 4-5 The descriptor type for Configuration Descriptors specified in EEPROM is a “don’t care” and is always overwritten by hardware as 0x02. Note 4-6 Default value is 01h in Self-Powered mode and FAh in Bus Powered mode. TABLE 4-5: CONFIGURATION DESCRIPTOR Offset Field Size (Bytes) Default Value Loaded from EEPROM Description 00h bLength 1 09h Note 4-4 Size of the Configuration Descriptor in bytes (9 bytes) 01h bDescriptorType 1 02h Note 4-5 Configuration Descriptor (0x02) 02h wTotalLength 2 0027h Note 4-4 Total length in bytes of data returned (39 bytes) 04h bNumInterfaces 1 01h Note 4-4 Number of interfaces 05h bConfigurationValue 1 01h Note 4-4 Value to use as an argument to select this configuration 06h iConfiguration 1 00h Yes Index of String Descriptor describing this configuration 07h bmAttributes 1 A0h Yes Bus powered and remote wakeup enabled. 08h bMaxPower 1 Note 4-6 Yes Maximum power consumption is 500 mA. Note: The RMT_WKP strap affects the default value of bmAttributes. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |