| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CAP1133 bảng dữ liệu(PDF) 29 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
CAP1133 bảng dữ liệu(HTML) 29 Page - Microchip Technology |
|
29 / 63 page ![]() 2015 Microchip Technology Inc. DS00001625B-page 29 CAP1133 The Averaging and Sampling Configuration register controls the number of samples taken and the total sensor input cycle time for all active sensor inputs while the device is functioning in Active state. Bits 6 - 4 - AVG[2:0] - Determines the number of samples that are taken for all active channels during the sensor cycle as shown in Table 6-18. All samples are taken consecutively on the same channel before the next channel is sampled and the result is averaged over the number of samples measured before updating the measured results. For example, if CS1, CS2, and CS3 are sampled during the sensor cycle, and the AVG[2:0] bits are set to take 4 samples per channel, then the full sensor cycle will be: CS1, CS1, CS1, CS1, CS2, CS2, CS2, CS2, CS3, CS3, CS3, CS3. Bits 3 - 2 - SAMP_TIME[1:0] - Determines the time to take a single sample as shown in Table 6-19. Bits 1 - 0 - CYCLE_TIME[1:0] - Determines the overall cycle time for all measured channels during normal operation as shown in Table 6-20. All measured channels are sampled at the beginning of the cycle time. If additional time is remain- ing, then the device is placed into a lower power state for the remaining duration of the cycle. APPLICATION NOTE: The programmed cycle time is only maintained if the total averaging time for all samples is less than the programmed cycle. The AVG[2:0] bits will take priority so that if more samples are required than would normally be allowed during the cycle time, the cycle time will be extended as necessary to accommodate the number of samples to be measured. TABLE 6-18: AVG BIT DECODE AVG[2:0] Number of Samples Taken per Measurement 21 0 00 0 1 00 1 2 01 0 4 0 1 1 8 (default) 10 0 16 10 1 32 11 0 64 1 1 1 128 TABLE 6-19: SAMP_TIME BIT DECODE SAMP_TIME[1:0] Sample Time 10 0 0 320us 0 1 640us 1 0 1.28ms (default) 1 1 2.56ms TABLE 6-20: CYCLE_TIME BIT DECODE CYCLE_TIME[1:0] Overall Cycle Time 10 00 35ms 0 1 70ms (default) 1 0 105ms 1 1 140ms |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |