LMV321M7SLASHNOPB datasheet(29/52 Pages) TI1

29 / 52 page

LMV321-N, LMV321-N-Q1, LMV358-N

LMV358-N-Q1, LMV324-N, LMV324-N-Q1

www.ti.com

SNOS012J – AUGUST 2000 – REVISED DECEMBER 2014

Typical Applications (continued)

Figure 65. Pulse Generator

Figure 66 is a squarewave generator with the same path for charging and discharging the capacitor.

Figure 66. Squarewave Generator

9.2.8 Current Source and Sink

The LMV321-N/LMV358-N/LMV324-N can be used in feedback loops which regulate the current in external PNP

transistors to provide current sources or in external NPN transistors to provide current sinks.

9.2.8.1 Fixed Current Source

A multiple fixed current source is shown in Figure 67. A voltage (VREF = 2V) is established across resistor R3 by

the voltage divider (R3 and R4). Negative feedback is used to cause the voltage drop across R1 to be equal to

VREF. This controls the emitter current of transistor Q1 and if we neglect the base current of Q1 and Q2,

essentially this same current is available out of the collector of Q1.

Large input resistors can be used to reduce current loss and a Darlington connection can be used to reduce

errors due to the

β of Q1.

The resistor, R2, can be used to scale the collector current of Q2 either above or below the 1 mA reference value.

Submit Documentation Feedback

Product Folder Links: LMV321-N LMV321-N-Q1 LMV358-N LMV358-N-Q1 LMV324-N LMV324-N-Q1

LMV321M7/NOPB bảng dữ liệu(PDF) 29 Page - Texas Instruments