TMP435

SBOS495A – MARCH 2010 – REVISED APRIL 2010

www.ti.com

This integrated circuit can be damaged by ESD. Texas Instruments recommends that all integrated circuits be handled with

appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.

ESD damage can range from subtle performance degradation to complete device failure. Precision integrated circuits may be more

susceptible to damage because very small parametric changes could cause the device not to meet its published specifications.

TWO-WIRE

PACKAGE

PRODUCT

DESCRIPTION

ADDRESS

PACKAGE-LEAD

PACKAGE DESIGNATOR

MARKING

Remote Junction

TMP435

Pin-programmable

MSOP-10

DGS

DTPI

Temperature Sensor

(1)

For the most current package and ordering information see the Package Option Addendum at the end of this document, or see the TI

web site at www.ti.com.

ABSOLUTE MAXIMUM RATINGS

(1)

Over operating free-air temperature range, unless otherwise noted.

TMP435

UNIT

+7.0

V

Pins 2, 3, 4, 5 and 8 only

V

Input Voltage

Pins 7, 9, and 10 only

–0.5 to 7

V

Input Current

10

mA

Operating Temperature Range

–55 to +127

°C

Storage Temperature Range

–60 to +130

°C

+150

°C

Human Body Model (HBM)

4000

V

ESD Rating

Charged Device Model (CDM)

1000

V

Machine Model (MM)

200

V

(1)

Stresses above these ratings may cause permanent damage. Exposure to absolute maximum conditions for extended periods may

degrade device reliability. These are stress ratings only, and functional operation of the device at these or any other conditions beyond

those specified is not implied.

2

Submit Documentation Feedback

Copyright © 2010, Texas Instruments Incorporated

Product Folder Link(s): TMP435