RF69 datasheet(8/81 Pages) ETC2

8 / 81 page

RF69

Page 8

Tel: +86-755-82973805 Fax: +86-755-82973550 E-mail: sales@hoperf.com http://www.hoperf.com

This product datasheet contains a detailed description of the RF69 performance and functionality.

1. General Description

The RF69 is a single-chip integrated circuit ideally suited for today's high performance ISM band RF applications. The

RF69's advanced features set, including state of the art packet engine greatly simplifies system design whilst the high

level of integration reduces the external BOM to a handful of passive decoupling and matching components. It is intended

for use as high-performance, low-cost FSK and OOK RF transceiver for robust frequency agile, half-duplex bi-directional

RF links, and where stable and constant RF performance is required over the full operating range of the device down to

1.8V.

The RF69 is intended for applications over a wide frequency range, including the 433 MHz and 868 MHz European and

the 902-928 MHz North American ISM bands. Coupled with a link budget in excess of 140 dB, the advanced system

features of the RF69 include a 66 byte TX/RX FIFO, configurable automatic packet handler, listen mode, temperature

sensor and configurable DIOs which greatly enhance system flexibility whilst at the same time significantly reducing MCU

requirements.

The RF69 complies with both ETSI and FCC regulatory requirements and is available in a 5x 5 mm QFN 28 lead

package

1.1. Simplified Block Diagram

Figure 1. Block Diagram

RF69 bảng dữ liệu(PDF) 8 Page - List of Unclassifed Manufacturers