| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN2281 bảng dữ liệu(PDF) 14 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN2281 bảng dữ liệu(HTML) 14 Page - STMicroelectronics |
|
14 / 38 page ![]() Application schematics AN2281 14/38 4.1 Gate driving and dead time insertion circuit Figure 11 shows in detail one of the three legs of the DC-AC inverter used in the reference schematic, with the corresponding gate driving circuit. The description of this leg is valid for the whole inverter. In order to drive the U4 MOSFETs correctly and to avoid their contemporary conduction, the signal coming from the microcontroller and applied at the base of bipolar transistor Q8 is, first of all, level shifted by the emitter follower stage (Q8) and, then, a dead time is inserted delaying the turn-on of the NMOS and PMOS devices and by making their turn-off instantaneous. Referring to the control signal (applied on point B in Figure 11) low-to-high transition and assuming the P-channel MOSFET fully turned on when |VGS|=VTH, you can compute the dead time value by solving the following equation: Figure 11. The dead time insertion circuit (4.1) VBUS=VTHp ( ) R13*CPMOSin t - 1-e |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |