công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

PM0222 bảng dữ liệu(PDF) 16 Page - STMicroelectronics

tên linh kiện PM0222
Giải thích chi tiết về linh kiện  Brain smart hub family
PDF  33 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  STMICROELECTRONICS [STMicroelectronics]
Trang chủ  http://www.st.com
Logo STMICROELECTRONICS - STMicroelectronics

PM0222 bảng dữ liệu(HTML) 16 Page - STMicroelectronics

Back Button PM0222 Datasheet HTML 12Page - STMicroelectronics PM0222 Datasheet HTML 13Page - STMicroelectronics PM0222 Datasheet HTML 14Page - STMicroelectronics PM0222 Datasheet HTML 15Page - STMicroelectronics PM0222 Datasheet HTML 16Page - STMicroelectronics PM0222 Datasheet HTML 17Page - STMicroelectronics PM0222 Datasheet HTML 18Page - STMicroelectronics PM0222 Datasheet HTML 19Page - STMicroelectronics PM0222 Datasheet HTML 20Page - STMicroelectronics Next Button
Zoom Inzoom in Zoom Outzoom out
 16 / 33 page
background image
Flash controller
PM0222
16/33
DocID025476 Rev 1
contains a signature of the memory read, built according to the following polynomial:
x32 + x31 + x4 + x3 + x1 + 1 (seed value = 0xFFFF_FFFF).
MASSREAD sequence:
–
Write in the Flash Controller DATA register the expected value (if MASSREAD is
used in combination with the READOK flag).
–
Write the MASSREAD command (0x55) in the Flash Controller COMMAND
register.
–
Wait for the CMDSTART flag in the IRQSTAT register (polling mode or interrupt
mode) indicating that the command has been taken into account and is under
execution.
–
Clear the CMDSTART flag by writing CMDSTART to ‘1’ in the Flash Controller
IRQSTAT register.
–
Then, wait for the CMDDONE flag in the IRQSTAT register (polling mode or
interrupt mode) indicating that the command is completed.
–
Check the READOK flag (expected high) in the IRQSTAT register or the LFSRVAL
register value to ensure Flash memory content is the expected result.
–
Clear the CMDDONE flag by writing CMDDONE to ‘1’ in the Flash Controller
IRQSTAT register.
6.2.3
Erase function examples
The Flash controller allows erasing one page or the full main Flash.
ERASE sequence:
–
Write the page address to be erased by writing in the Flash Controller ADDRESS
register the following value:
ADDRESS[13:9] = XADR[7:3] = page address to erase
ADDRESS[8:0] = 9’b0 (row and word addresses at zero).
–
Write the ERASE command (0x11) in the Flash Controller COMMAND register.
–
Wait for the CMDSTART flag in the IRQSTAT register (polling mode or interrupt
mode) indicating command is taken into account and under execution.
–
Clear the CMDSTART flag by writing CMDSTART to ‘1’ in the Flash Controller
IRQSTAT register.
–
Wait for the CMDDONE flag in the IRQSTAT register (polling mode or interrupt
mode) indicating that the command is completed.
–
Clear the CMDDONE flag by writing CMDDONE to ‘1’ in the Flash Controller
IRQSTAT register.
–
After this command, the erased page will contain only bits set to ‘1’.



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com