| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AN4460 bảng dữ liệu(PDF) 31 Page - STMicroelectronics |
|
|
|||||||||||||||||||||||||||||
AN4460 bảng dữ liệu(HTML) 31 Page - STMicroelectronics |
|
31 / 54 page ![]() DocID026129 Rev 1 31/54 AN4460 User interface 54 7.4.2 ll - change LED dimming level To change the LED dimming level, use the “ll” command. The value is stored into the E2PROM data area for its read back and applies to next power-on. Syntax: ll [ch] [level] Parameters: ch [0-3]: the LED string channel value. level: [0-256]: indicates the dimming level in a scale from 0 (OFF) to 256 (always ON), a value between 1 (0.4%) and 255 (99.6%) indicates the dimming level. A value of 256 turns the LED chain on at full brightness (100%). When the global dimming level is different from 100% (via “ed” and “di” command), the equivalent current on example is equal to ('level / 256) * (global dimming level). Output: none Example: “ll 3 200": sets up channel 3 to use a current equal to 200/256 of the maximum current defined by the “lc” command. 7.4.3 ln - configure LED number Used to setup, before connecting any LED, the number of LEDs used in a specified chain. The value is stored into the E2PROM data area for its read back and applies to next power- on. Syntax: ln [ch] [num] Parameters: ch [0-3]: the channel number. num [3-10] the number of LEDs. The minimum LED number is 3; the maximum LED number is 10. Output: none Example: “ln 1 6": sets up six LEDs on the channel 1. 7.4.4 ad - read ADC channel Reads the ADC channel [ch] and displays the result in decimal value. Syntax: ad [ch] Parameters: ch [0-7]: ADC channel number. For the ADC channel association, see the board schematics. Output: The output value is the decimal conversion read from the ADC channel. The value read from the LED channel (VCOMx point) depends on the dimming level. The correct input voltage at the STLUX385A pin is given by the ADC value multiplied by 0,001221896 {= (1.25/[(210)-1]}. For channels 0, 1, 2, 3, 4, 6, the ADC value has to be multiplied for 0.05437489. Example: “ad 0": reads the power line voltage. |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |