UM1545 datasheet(32/64 Pages) STMICROELECTRONICS

32 / 64 page

APW walkthrough

UM1545

32/64

Doc ID 023225 Rev 1

After a script has been run, a summary of the completed operations is available in the Log

Viewer window together with the log of the operations performed. Different colors are used

to signal particular events (Figure 28):

●

Green: the operation has ended successfully.

●

Red: the operation failed.

●

Orange: the operation has been performed with anomalous parameters (e.g. 5

coefficients have been written, starting from an address not corresponding to a

biquadratic filter).

2.7

Command shell

The scripts tokens can also be cast as instantaneous commands through the Command

Shell. To open it use the button on the right side of the APW window (Figure 29), or select it

from the drop-down menu Panels (Figure 30). For a complete list of the available

commands, please refer to Section 2.6: Scripts or type help, the list of available tokens will

be displayed in the Log Viewer. The Command Shell will appear as depicted in Figure 31.

The Command Shell button is located on the right side of the APW window, just beneath the

log viewer button. It can also be activated by left clicking on the Panels drop-down menu or

pressing F3.

Figure 29.

Location of Command Shell button

Figure 30.

Drop-down menu

Figure 31.

Command Shell window

UM1545 bảng dữ liệu(PDF) 32 Page - STMicroelectronics