CDP1852CD datasheet(2/9 Pages) INTERSIL

2 / 9 page

A CLEAR control is provided for resetting the port’s register

(DO0-DO7 = 0) and service request flip-flop (input mode:

SR/ SR = 1 and output mode: SR/SR = 0).

The CDP1852 is functionally identical to the CDP1852C.

The CDP1852 has a recommended operating voltage range

of 4 to 10.5 volts, and the CDP1852C has a recommended

operating voltage range of 4 to 6.5 volts.

The CDP1852 and CDP1852C are supplied in 24-lead,

hermetic, dual-in-line ceramic packages (D suffix), in 24-lead

dual-in-line plastic packages (E suffix). The CDP1852C is

also available in chip form (H suffix).

Absolute Maximum Ratings

Thermal Information

DC Supply-voltage Range, (VDD)

(Voltage Referenced to VSS Terminal)

CDP1852 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.5 to +11V

CDP1852C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .-0.5 to +7V

Input Voltage Range, All Inputs . . . . . . . . . . . . . . -0.5 to VDD +0.5V

DC Input Current, Any One Input

. . . . . . . . . . . . . . . . . . . . . . . .±10mA

Device Dissipation Per Output Transistor. . . . . . . . . . . . . . . 100mW

For TA = Full Package-Temperature Range

(All Package Type)

Thermal Resistance (Typical)

JA (

oC/W)

JC (

oC/W)

PDIP Package . . . . . . . . . . . . . . . . . . .

N/A

SBDIP Package. . . . . . . . . . . . . . . . . .

Operating-Temperature Range (TA)

Package Type D, H . . . . . . . . . . . . . . . . . . . . . . . -55oC to +125oC

Package Type E . . . . . . . . . . . . . . . . . . . . . . . . . . -40oC to +85oC

Storage Temperature Range (TSTG) . . . . . . . . . . . . -65

oC to +150oC

Lead Temperature (During Soldering): . . . . . . . . . . . . . . . . . +265oC

At Distance 1/16

± 1/32 inch (1.59 ± 0.79mm)

from Case for 10s max

CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operation

of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied.

Operating Conditions

At TA = Full Package Temperature Range. For Maximum Reliability, Operating Conditions Should be

Selected so that Operation is Always within the Following Ranges:

PARAMETER

LIMITS

UNITS

CDP1852

CDP1852C

MIN

MAX

MIN

MAX

DC Operating Voltage Range

10.5

6.5

Input Voltage Range

VSS

VDD

VSS

VDD

Functional Diagram

NOTE:

1. Polarity depends on mode.

FIGURE 2. FUNCTIONAL BLOCK DIAGRAM FOR CDP1852

CONTROL

LOGIC

RESET

8-BIT

DATA

DEVICE

SELECT

DECODE

CSI/CSI

CLOCK

(NOTE 1)

CS2

MODE

CLOCK

CLEAR

DI0

DI1

DI2

DI3

DI4

DI5

DI6

DI7

SR/SR

(NOTE 1)

VDD

VSS

ENABLE

THREE-

STATE

OUTPUT

DO0

DO1

DO2

DO3

DO4

DO5

DO6

DO7

DRIVERS

MODE 0

MODE 1

CSI

P23

CDP1852, CDP1852C

CDP1852CD bảng dữ liệu(PDF) 2 Page - Intersil Corporation

CDP1852CD bảng dữ liệu(HTML) 2 Page - Intersil Corporation

Html Pages

1 2 3 4 5 6 7 8 9

bảng dữ liệu tải về

Link URL