Compact Sensors

74

More information online at

bannerengineering.com

WORLD-BEAM

WORLD-BEAM

Supply Voltage

10 to 30V dc (10% max. ripple) at less than 35 mA, exclusive of load; 10 to 24V dc @ greater than 55° C

Supply Protection Circuitry

Protected against reverse polarity and transient voltages

Output Configuration

SPST solid-state NPN (current sinking) or PNP (current sourcing), depending on model. Configuration in TEACH

sequence for light operate (LO) or dark operate (DO).

Rating: 100 mA max.

OFF-state leakage current: less than 50 µA @ 30V dc

ON-state saturation voltage: less than 1.5V (2 m cable); 1.7V (9 m cable)

Protected against false pulse on power-up and continuous overload or short circuit of output

Output Response Time

600 microseconds ON/OFF

Delay at Power-up

Less than 1 second; outputs do not conduct during this time

Repeatability

75 microseconds

Adjustments

Push button and remote wire

• Thresholds: Push-button/remote-wire teachable

• Light/dark operate: Selectable by programming order (load output follows the first taught target condition)

• Push-button lockout (remote wire only)

Indicators

2 LED indicators:

Green: RUN mode, output short-circuit

Red: Output ON/marginal, TEACH mode

Construction

Polycarbonate/ABS housing and TPE push button, rated IEC IP67; NEMA 6

3 mm mounting hardware included

Connections

2 m or 9 m 4-wire PVC cable, or 4-pin 150 mm pigtail Pico-style QD (Q), or 4-pin 150 mm pigtail Euro-style QD (Q5), or

4-pin Integral Pico-style QD (Q7), or 4-pin Integral Euro-style QD (Q8). QD cables are ordered separately. See pages 378

and 380.

Operating Conditions

Temperature: -20° to +70° C

Relative humidity: 90% @ 50° C (non-condensing)

Application Note

The first condition presented during TEACH mode becomes the OUTPUT ON condition.

Certifications

Hookup Diagrams

NPN Models: DC09 (p. 478)

PNP Models: DC10 (p. 478)

WORLD-BEAM

See page 295.