CS4299 datasheet(26/52 Pages) CIRRUS

26 / 52 page

CS4299

4.11

General Purpose Register (Index 20h)

3D Enable. When ‘set’, the 3D bit enables the CrystalClearTM 3D stereo enhancement. This

function is not available in DAC Direct Mode (DDM).

MIX

Mono Output Select. The MIX bit selects the source for the Mono Out output. When ‘set’, the

microphone input is selected. When ‘clear’, the stereo-to-mono mixer is selected.

Microphone Select. The MS bit determines which of the two Mic inputs are passed to the mixer.

When ‘set’, the MIC2 input is selected. When ‘clear’, the MIC1 input is selected.

LPBK

Loopback Enable. When ‘set’, the LPBK bit enables the ADC/DAC Loopback Mode. This bit

routes the output of the ADCs to the input of the DACs without involving the AC-link.

Default

0000h

4.12

3D Control Register (Index 22h)

S[3:0]

Spacial Enhancement Depth. These bits control the amount of “space” added to the output ste-

reo signal. When S[3:0] = 0000, the minimum amount of spatial enhancement is added. When

S[3:0] = 1111, the maximum amount of spatial enhancement is added. The 3D function is en-

abled and disabled by the 3D bit in the General Purpose Register (Index 20h).

Default

0000h. This value corresponds to minimum spatial enhancement added to the output signal.

D15

D14

D13

D12

D11

D10

MIX

LPBK

000000

D15

D14

D13

D12

D11

D10

000

CS4299 bảng dữ liệu(PDF) 26 Page - Cirrus Logic