PCF8583 datasheet(14/37 Pages) PHILIPS

tên linh kiện	PCF8583

Giải thích chi tiết về linh kiện	Clock and calendar with 240 x 8-bit RAM

PDF	37 Pages

Scroll/Zoom	100%

nhà sản xuất	PHILIPS [NXP Semiconductors]

Trang chủ	http://www.nxp.com

Logo

14 / 37 page

PCF8583

All information provided in this document is subject to legal disclaimers.

Product data sheet

Rev. 06 — 6 October 2010

14 of 37

NXP Semiconductors

PCF8583

Clock and calendar with 240 x 8-bit RAM

In the 50 Hz clock mode or event-counter mode the oscillator is disabled and the oscillator

input is switched to a high-impedance state. This allows the user to feed the 50 Hz

reference frequency or an external high speed event signal into the input OSCI.

7.11 Initialization

When power-on occurs the I2C-bus interface, the control and status register and all clock

counters are reset. The device starts time-keeping in the 32.768 kHz clock mode with the

24 hour format on the first of January at 0.00.00:00. A 1 Hz square wave with 50 % duty

cycle appears at the interrupt output pin (starts HIGH).

The stop counting flag of the control and status register must be set before loading the

actual time into the counters. Loading of illegal states leads to a temporary clock

malfunction.

PCF8583 bảng dữ liệu(PDF) 14 Page - NXP Semiconductors