công cụ tìm kiếm bảng dữ liệu linh kiện điện tử
  Vietnamese  ▼
ALLDATASHEET.VN

X  

AS8515 bảng dữ liệu(PDF) 12 Page - ams AG

tên linh kiện AS8515
Giải thích chi tiết về linh kiện  Data Acquisition System with Power Management and LIN Transceiver for 12V Battery Sensor Applications
PDF  65 Pages
Scroll/Zoom Zoom In 100%  Zoom Out
nhà sản xuất  AMSCO [ams AG]
Trang chủ  http://www.ams.com
Logo AMSCO - ams AG

AS8515 bảng dữ liệu(HTML) 12 Page - ams AG

Back Button AS8515 Datasheet HTML 8Page - ams AG AS8515 Datasheet HTML 9Page - ams AG AS8515 Datasheet HTML 10Page - ams AG AS8515 Datasheet HTML 11Page - ams AG AS8515 Datasheet HTML 12Page - ams AG AS8515 Datasheet HTML 13Page - ams AG AS8515 Datasheet HTML 14Page - ams AG AS8515 Datasheet HTML 15Page - ams AG AS8515 Datasheet HTML 16Page - ams AG Next Button
Zoom Inzoom in Zoom Outzoom out
 12 / 65 page
background image
www.ams.com
Revision 0.7
12 - 65
AS8515
Datasheet - AS8515 To p Die Overview
7.5 VSUP Under-voltage Reset
When VSUP drops below VSUVR_ON, the RESET_VSUP_N switches back to low level. This is treated as a master reset and will have the
highest priority over all other signals. In this case, the regulators, LIN transceiver, and all other blocks are shut off, and the device comes to a
complete stop. The device returns to the normal mode when VSUP rises over VSUVR_OFF again irrespective of the mode it was in prior to this
under-voltage condition.
7.6 Reset
RESET module generates an active-low reset signal for the external circuitry supplied by VCC. The behavior of the reset output is depicted in
Figure 4 in different cases. As shown, RESET signal is affected by an under-voltage condition on VCC and Watchdogs which are described in
detail in the subsequent sections.
The reset period can be one-time programmed to 4, 16 and 32 ms with a default value of 8 ms.
Figure 4. Reset Functionality
7.7 VCC Under-voltage Reset
When VCC drops below VUVR_ON, the RESET_VCC_N switches back to low level. This event generates a reset output. The reset output is
released again only a reset period (tRes) later after VCC rises above VUVR_OFF. If the time difference between the VCC falling below VUVR_ON
and rising above VUVR_OFF is less than trr, there will be no reset output. The reset output is affected in the conditions like over-temperature
shutdown and temporary shutdown only through VCC under voltage.
VCC
VSUP
VUVR_OFF
tRes
trr
T>Tj
T<Tj
t<trr
tRes
tRes
tRes
RESET
Start-up
Over-temp
Shutdown
Glitch in
VSUP
VSUP UV
SC Current
Limitation Active
VUVR_ON
tRes
Reset by
Watchdog



Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65


bảng dữ liệu tải về

Go To PDF Page


Link URL



Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không?  [ DONATE ] 

Alldatasheet là   |   Quảng cáo   |   Liên lạc với chúng tôi   |   Chính sách bảo mật   |   Liên kết đến bảng dữ liệu    |   Trao đổi link   |   Tìm kiếm theo nhà sản xuất
All Rights Reserved©Alldatasheet.com


Mirror Sites
English : Alldatasheet.com  |   English : Alldatasheet.net  |   Chinese : Alldatasheetcn.com  |   German : Alldatasheetde.com  |   Japanese : Alldatasheet.jp
Russian : Alldatasheetru.com  |   Korean : Alldatasheet.co.kr  |   Spanish : Alldatasheet.es  |   French : Alldatasheet.fr  |   Italian : Alldatasheetit.com
Portuguese : Alldatasheetpt.com  |   Polish : Alldatasheet.pl  |   Vietnamese : Alldatasheet.vn
Indian : Alldatasheet.in  |   Mexican : Alldatasheet.com.mx  |   British : Alldatasheet.co.uk  |   New Zealand : Alldatasheet.co.nz
Family Site : ic2ic.com  |   icmetro.com