MACH211SP-14/18/24 (Ind)

21

Notes:

1. These parameters are not 100% tested, but are evaluated at initial characterization and at any time the design is modified

where capacitance may be affected.

2. See Switching Test Circuit for test conditions.

3. If a signal is powered-down, this parameter must be added to its respective high-speed parameter.

Input Latch Gate to Output Through Transparent

Output Latch

23

26.5

32.5

ns

Setup Time from Input, I/O, or Feedback Through

Transparent Input Latch to Output Latch Gate

11

14.5

18

ns

Input Latch Gate to Output Latch Setup

16

19.5

25.5

ns

Input Latch Gate Width LOW

7.5

7.5

10

ns

Input, I/O, or Feedback to Output Through

Transparent Input and Output Latches

19.5

23

29

ns

Asynchronous Reset to Registered or Latched

Output

19.5

24

30

ns

Asynchronous Reset Width (Note 1)

14.5

18

24

ns

Asynchronous Reset Recovery Time (Note 1)

10

12

18

ns

Asynchronous Preset to Registered or Latched

Output

19.5

24

30

ns

Asynchronous Preset Width (Note 1)

14.5

18

24

ns

Asynchronous Preset Recovery Time (Note 1)

10

12

18

ns

Input, I/O, or Feedback to Output Enable (Note 1)

14.5

18

24

ns

Input, I/O, or Feedback to Output Disable

(Note 1)

14.5

18

24

ns

(Note 3)

10

10

10

ns

10

10

10

ns

(Note 3)

000

ns

(Note 3)

10

10

10

ns

SWITCHING CHARACTERISTICS over INDUSTRIAL operating ranges (Note 2) (continued)

Parameter

Symbol

Parameter Description

-14

-18

-24

Unit

Min

Max

Min

Max

Min

Max