AMC010CFLKA datasheet(29/42 Pages) AMD

29 / 42 page

5/4/98

AmC0XXCFLKA

ABSOLUTE MAXIMUM RATINGS

Storage Temperature . . . . . . . . . . . . . –30

°C to +70°C

Ambient Temperature

with Power Applied. . . . . . . . . . . . . . . –10

°C to +70°C

Voltage at All Pins (Note 1) . . . . . . . . –2.0 V to +7.0 V

VCC (Note 1). . . . . . . . . . . . . . . . . . . . . –0.5 V to 6.0 V

Output Short Circuit Current (Note 2) . . . . . . . 40 mA

Notes:

1. Minimum DC voltage on input or I/O pins is –0.5 V. During

voltage transitions, inputs may overshoot VSS to –2.0 V

for periods of up to 20 ns. Maximum DC voltage on output

and I/O pins is VCC + 0.5 V. During voltage transitions,

outputs may overshoot to VCC + 2.0 V for periods up to

20ns.

2. No more than one output shorted at a time. Durations of

the short circuit should not be greater than one second.

Conditions equal VOUT = 0.5 V or 5.0 V, VCC = VCC max.

These values are chosen to avoid test problems caused

by tester ground degradation. This parameter is sampled

and not 100% tested, but guaranteed by characterization.

3. VPP1 and VPP2 are not connected.

Stresses above those listed under “Absolute Maximum

Ratings” may cause permanent damage to the device. This is

a stress rating only; functional operation of the device at

these or any other conditions above those indicated in the op-

erational sections of this specification is not implied. Expo-

sure of the device to absolute maximum rating conditions for

extended periods may affect device reliability.

OPERATING RANGES

Commercial (C) Devices

Case Temperature (TC). . . . . . . . . . . . . .0°C to +60°C

VCC Supply Voltages. . . . . . . . . . . . +4.75 V to 5.25 V

Operating ranges define those limits between which the

functionality of the device is guaranteed.

AMC010CFLKA bảng dữ liệu(PDF) 29 Page - Advanced Micro Devices