W25Q40BLSVIP datasheet(26/74 Pages) WINBOND

tên linh kiện	W25Q40BLSVIP

Giải thích chi tiết về linh kiện	2.5V 4M-BIT SERIAL FLASH MEMORY WITH DUAL AND QUAD SPI

PDF	74 Pages

Scroll/Zoom	100%

nhà sản xuất	WINBOND [Winbond]

Trang chủ	http://www.winbond.com

Logo

26 / 74 page

W25Q40BL

- 26 -

7.2.12 Fast Read Dual Output (3Bh)

The Fast Read Dual Output (3Bh) instruction is similar to the standard Fast Read (0Bh) instruction except

that data is output on two pins; IO0 and IO1. This allows data to be transferred from the W25Q40BL at

twice the rate of standard SPI devices. The Fast Read Dual Output instruction is ideal for quickly

downloading code from Flash to RAM upon power-up or for applications that cache code-segments to

RAM for execution.

Similar to the Fast Read instruction, the Fast Read Dual Output instruction can operate at the highest

possible frequency of FR (see AC Electrical Characteristics). This is accomplished by adding eight

“dummy” clocks after the 24-bit address as shown in figure 11. The dummy clocks allow the device's

internal circuits additional time for setting up the initial address. The input data during the dummy clocks is

“don’t care”. However, the IO0 pin should be high-impedance prior to the falling edge of the first data out

clock.

Figure 11. Fast Read Dual Output Instruction Sequence Diagram

W25Q40BLSVIP bảng dữ liệu(PDF) 26 Page - Winbond