TAS5731MPHPR datasheet(46/68 Pages) TI1

46 / 68 page

TAS5731M

SLOS838B – JULY 2013 – REVISED NOVEMBER 2013

www.ti.com

CLOCK CONTROL REGISTER (0x00)

The clocks and data rates are automatically determined by the TAS5731M. The clock control register contains

the auto-detected clock status. Bits D7–D5 reflect the sample rate. Bits D4–D2 reflect the MCLK frequency. The

device accepts a 64 fS or 32 fS SCLK rate for all MCLK ratios, but accepts a 48 fS SCLK rate for MCLK ratios of

192 fS and 384 fS only.

Table 4. Clock Control Register (0x00)

FUNCTION

–

fS = 32-kHz sample rate

–

Reserved(1)

–

Reserved(1)

–

fS = 44.1/48-kHz sample rate

(2)

–

fS = 16-kHz sample rate

–

fS = 22.05/24 -kHz sample rate

–

fS = 8-kHz sample rate

–

fS = 11.025/12 -kHz sample rate

–

MCLK frequency = 64 × fS

(3)

–

MCLK frequency = 128 × fS

(3)

–

MCLK frequency = 192 × fS

(4)

–

MCLK frequency = 256 × fS

(2) (5)

–

MCLK frequency = 384 × fS

–

MCLK frequency = 512 × fS

–

Reserved(1)

–

Reserved(1)

–

Reserved(1) (2)

–

Reserved(1) (2)

(1)

Reserved registers should not be accessed.

(2)

Default values are in bold.

(3)

Only available for 44.1-kHz and 48-kHz rates

(4)

Rate only available for 32/44.1/48-KHz sample rates

(5)

Not available at 8 kHz

DEVICE ID REGISTER (0x01)

The device ID register contains the ID code for the firmware revision.

Table 5. General Status Register (0x01)

FUNCTION

Identification code

Product Folder Links :TAS5731M

TAS5731MPHPR bảng dữ liệu(PDF) 46 Page - Texas Instruments

TAS5731MPHPR bảng dữ liệu(HTML) 46 Page - Texas Instruments

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68

bảng dữ liệu tải về

Link URL