| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
MCP2003 bảng dữ liệu(PDF) 12 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
MCP2003 bảng dữ liệu(HTML) 12 Page - Microchip Technology |
|
12 / 34 page ![]() MCP2003/4/3A/4A DS22230D-page 12 © 2010-2011 Microchip Technology Inc. 2.0 ELECTRICAL CHARACTERISTICS 2.1 Absolute Maximum Ratings† VIN DC Voltage on RXD, TXD, FAULT/TXE, CS ............................................................................................. -0.3 to +43V VIN DC Voltage on WAKE and VREN .............................................................................................................-0.3 to +VBB VBB Battery Voltage, continuous, non-operating (Note 1)............................................................................. -0.3 to +40V VBB Battery Voltage, non-operating (LIN bus recessive) (Note 2) ................................................................ -0.3 to +43V VBB Battery Voltage, transient ISO 7637 Test 1 ..................................................................................................... -200V VBB Battery Voltage, transient ISO 7637 Test 2a ...................................................................................................+150V VBB Battery Voltage, transient ISO 7637 Test 3a ................................................................................................... -300V VBB Battery Voltage, transient ISO 7637 Test 3b ...................................................................................................+200V VLBUS Bus Voltage, continuous ...................................................................................................................... -18 to +40V VLBUS Bus Voltage, transient (Note 3) ........................................................................................................... -27 to +43V ILBUS Bus Short Circuit Current Limit ....................................................................................................................200 mA ESD protection on LIN, VBB, WAKE (IEC 61000-4-2) (Note 4)............................................................................... ±8 KV ESD protection on LIN, VBB (Human Body Model) (Note 5) ................................................................................... ±8 KV ESD protection on all other pins (Human Body Model) (Note 5) ............................................................................ ±4 KV ESD protection on all pins (Charge Device Model) (Note 6)................................................................................... ±2 KV ESD protection on all pins (Machine Model) (Note 7).............................................................................................±200V Maximum Junction Temperature ............................................................................................................................. 150 °C Storage Temperature...................................................................................................................................-65 to +150 °C Note 1: LIN 2.x compliant specification. 2: SAE J2602 compliant specification. 3: ISO 7637/1 load dump compliant (t < 500 ms). 4: According to IEC 61000-4-2, 330 ohm, 150 pF and Transceiver EMC Test Specifications [2] to [4]. For WAKE pin to meet the specification, series resistor must be in place (refer to Example 1-2). 5: According to AEC-Q100-002 / JESD22-A114. 6: According to AEC-Q100-011B. 7: According to AEC-Q100-003 / JESD22-A115. 2.2 Nomenclature used in this document Some terms and names used in this data sheet deviate from those referred to in the LIN specifications. Equivalent values are shown below. † NOTICE: Stresses above those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device, at those or any other conditions above those indicated in the operational listings of this specification, is not implied. Exposure to maximum rating conditions for extended periods may affect device reliability. LIN 2.1 Name Term used in the following tables Definition V BAT not used ECU operating voltage V SUP VBB Supply voltage at device pin I BUS _LIM ISC Current Limit of Driver V BUSREC VIH(LBUS) Recessive state V BUSDOM VIL(LBUS) Dominant state |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |