ISSP Guide, Spec. # 001-15301 Rev. **

9

2.

Software Installation

The software can be installed from the CD-ROM included in the box or from the Cypress Semicon-

ductor web site at www.cypress.com.

2.1

Supported Operating Systems

■

Windows 2000

■

Windows XP

■

Windows Vista (32 bit)

2.2

CD Installation

2.2.1

Windows 2000/XP CD Installation

If the ISSP software has previously been installed, you must run the install program twice. The first

time uninstalls the previous version. The second run installs the new version. To install the ISSP soft-

ware, perform the following procedure.

1. Place the CD-ROM in the CD drive. The software installer should start automatically.

If the CD-ROM does not run or to run it a second time, browse to My Computer and double click

the CD-ROM icon labeled ISSP 1.80.

2. Follow the on-screen instructions to complete the installation.

2.2.2

Windows Vista (32 Bit) CD Installation

Follow these instructions for installing ISSP Software on computers running Windows Vista.

Note: ISSP Software must be installed in Windows 2000 compatibility mode, and run in Windows

2000 compatibilty mode.

Do not install from autorun installer, when installer starts automaticially upon CD insertion cancel

the installation.

a. Browse to My Computer and double-click the CD-ROM icon labled ISSP 1.89.

b. Right-click on Setup, and select Properties.

c. Click the Compatibilty tab.

d. Check Run this program in compatiblity mode for.

e. Select Windows 2000 from the drop down menu.

f. Click Apply

g. Click OK.

h. Double-click on Setup and follow on screen prompts.

i.

Vista will warn that drivers are unsigned; click OK.

j.

Once installed browse to c:\Programs Files\Cypress MicroSystems\ISSP\

[+] Feedback

[+] Feedback