LM7301

www.ti.com

SNOS879H – AUGUST 1999 – REVISED MARCH 2013

Typical Performance Characteristics (continued)

Gain and Phase

Gain and Phase, 2.7V Supply

Figure 21.

Figure 22.

APPLICATIONS INFORMATION

GENERAL INFORMATION

Low supply current, wide bandwidth, input common mode voltage range that includes both rails, “rail-to-rail”

output, good capacitive load driving ability, wide supply voltage (1.8V to 32V) and low distortion all make the

LM7301 ideal for many diverse applications.

The high common-mode rejection ratio and full rail-to-rail input range provides precision performance when

operated in non-inverting applications where the common-mode error is added directly to the other system

errors.

CAPACITIVE LOAD DRIVING

The LM7301 has the ability to drive large capacitive loads. For example, 1000 pF only reduces the phase margin

to about 25 degrees.

TRANSIENT RESPONSE

The LM7301 offers a very clean, well-behaved transient response. Figure 23, Figure 24, Figure 25, Figure 26,

Figure 27, Figure 28 show the response when operated at gains of +1 and

−1 when handling both small and

large signals. The large phase margin, typically 70 to 80 degrees, assures clean and symmetrical response. In

the large signal scope photos, Figure 23 and Figure 26, the input signal is set to 4.8V. Note that the output goes

to within 100 mV of the supplies cleanly and without overshoot. In the small signal samples, the response is

clean, with only slight overshoot when used as a follower. Figure 25 and Figure 28 are the circuits used to make

these photos.

Figure 23.

Copyright © 1999–2013, Texas Instruments Incorporated

Submit Documentation Feedback

9

Product Folder Links: LM7301