CV500-SLK21 datasheet(85/182 Pages) OMRON

tên linh kiện	CV500-SLK21

Giải thích chi tiết về linh kiện	Programmable Controllers

PDF	182 Pages

Scroll/Zoom	100%

nhà sản xuất	OMRON [Omron Electronics LLC]

Trang chủ	http://www.omron.com/index3.html

Logo

85 / 182 page

4-3

Output Unit Fuses

The following Output Units have one fuse each as shown in the table.

Output Unit

Fuse specifications

C500-OD411

C500-OD217

C500-OA223

250 V, 5 A

C500-OA121

C500-OA222

C500-OA226

250 V, 5 A

C500-OD219

250 V, 10 A

To replace a fuse in an Output Unit, perform the following steps.

1, 2, 3...

1. Turn off the power to the PC.

2. Detach the terminal block from the Output Unit by removing the screws lo-

cated at the top and bottom of the terminal block.

Mounting screws

Located at the top and bottom.

Terminal block mounting screws

Located at the top and bottom of

the terminal block.

Cover mounting screws (8)

3. Remove the screws that mount the Output Unit to the Backplane. Pulling the

Unit toward you, remove the Output Unit from the Backplane.

4. There are eight screws on each side of the Output Unit. Remove these

screws to detach the case from the cover.

5. Pull out the printed circuit board.

6. Insert a new fuse.

7. Reassemble the Unit.

4-4

Output Unit Relays

To replace a Relay in an Output Unit, take the following steps.

1, 2, 3...

1. Turn off the power to the PC.

Output Unit Relays

Section 4-4

CV500-SLK21 bảng dữ liệu(PDF) 85 Page - Omron Electronics LLC