DSPIC33FJ64GS406 datasheet(118/456 Pages) MICROCHIP

118 / 456 page

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610

DS70591E-page 118

 2009-2012 Microchip Technology Inc.

FIGURE 6-2:

SYSTEM RESET TIMING

Reset

Run

Device Status

VDD

VPOR

VBOR

POR

BOR

SYSRST

TPWRT

TPOR

TBOR

Oscillator Clock

TOSCD

TOST

TLOCK

Time

FSCM

TFSCM

Note 1: POR: A POR circuit holds the device in Reset when the power supply is turned on. The POR circuit is active until

VDD crosses the VPOR threshold and the delay, TPOR, has elapsed.

2: BOR: The on-chip voltage regulator has a BOR circuit that keeps the device in Reset until VDD crosses the VBOR

threshold and the delay, TBOR, has elapsed. The delay, TBOR, ensures the voltage regulator output becomes

stable.

3: PWRT Timer: The programmable Power-up Timer (PWRT) continues to hold the processor in Reset for a specific

period of time (TPWRT) after a BOR. The delay, TPWRT, ensures that the system power supplies have stabilized

at the appropriate level for full-speed operation. After the delay, TPWRT has elapsed and the SYSRST becomes

inactive, which in turn, enables the selected oscillator to start generating clock cycles.

4: Oscillator Delay: The total delay for the clock to be ready for various clock source selections is given in

Table 6-1. Refer to Section 9.0 “Oscillator Configuration” for more information.

5: When the oscillator clock is ready, the processor begins execution from location, 0x000000. The user application

programs a GOTO instruction at the Reset address, which redirects program execution to the appropriate start-up

routine.

6: If the Fail-Safe Clock Monitor (FSCM) is enabled, it begins to monitor the system clock when the system clock is

ready and the delay, TFSCM, has elapsed.

Note:

When the device exits the Reset condition (begins normal operation), the device operating parameters

(voltage, frequency, temperature, etc.) must be within their operating ranges; otherwise, the device may

not function correctly. The user application must ensure that the delay between the time power is first

applied, and the time SYSRST becomes inactive, is long enough to get all operating parameters within

specification.

dsPIC33FJ64GS406 bảng dữ liệu(PDF) 118 Page - Microchip Technology

dsPIC33FJ64GS406 bảng dữ liệu(HTML) 118 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL