DSPIC33FJ64GS406 datasheet(416/456 Pages) MICROCHIP

416 / 456 page

dsPIC33FJ32GS406/606/608/610 and dsPIC33FJ64GS406/606/608/610

DS70591E-page 416

 2009-2012 Microchip Technology Inc.

TABLE 28-4:

DC CHARACTERISTICS: DOZE CURRENT (IDOZE)

DC CHARACTERISTICS

Standard Operating Conditions: 3.0V to 3.6V

(unless otherwise stated)

Operating temperature

-40°C

 TA  +85°C for Industrial

Parameter No.

Typical

Max

Doze

Ratio

Units

Conditions

Doze Current (IDOZE)(1)

MDC74a

1:2

-40°C

3.3V

50 MIPS

MDC74f

1:64

MDC74g

1:128

MDC75a

1:2

+25°C

3.3V

50 MIPS

MDC75f

1:64

MDC75g

1:128

MDC76a

1:2

+85°C

3.3V

50 MIPS

MDC76f

1:64

MDC76g

1:128

Note 1: IDOZE is primarily a function of the operating voltage and frequency. Other factors, such as I/O pin loading

and switching rate, oscillator type, internal code execution pattern and temperature, also have an impact

on the current consumption. The test conditions for all IDOZE measurements are as follows:

• Oscillator is configured in EC mode and external clock is active, OSC1 is driven with external square

wave from rail-to-rail (EC clock overshoot/undershoot < 250 mV required)

• CLKO is configured as an I/O input pin in the Configuration Word

• All I/O pins are configured as inputs and pulled to VSS

•MCLR = VDD, WDT and FSCM are disabled

• CPU, SRAM, program memory and data memory are operational

• No peripheral modules are operating; however, every peripheral is being clocked (all PMDx bits

are ‘0’s)

• CPU executing while(1) statement

• JTAG is disabled

dsPIC33FJ64GS406 bảng dữ liệu(PDF) 416 Page - Microchip Technology

dsPIC33FJ64GS406 bảng dữ liệu(HTML) 416 Page - Microchip Technology

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 ...More

bảng dữ liệu tải về

Link URL