| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SP720APP bảng dữ liệu(PDF) 1 Page - Littelfuse |
|
|
|||||||||||||||||||||||||||||
SP720APP bảng dữ liệu(HTML) 1 Page - Littelfuse |
|
1 / 6 page ![]() 55 ©2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com/SPA for current information. TVS Diode Arrays (SPA™Family of Products) Revision: April 14, 2011 SP720 Lead-Free/Green Series General Purpose ESD Protection - SP720 Series Description Features - MIL STD 3015.7................................................. 15kV - IEC 61000-4-2, Direct Discharge, - Single Input .......................................... 4kV (Level 2) - Two Inputs in Parallel ............................ 8kV (Level 4) - IEC 61000-4-2, Air Discharge...............15kV (Level 4) - IEC 61000-4-5 (8/20μs) ....................................... ±3A - Single Pulse, 100μs Pulse Width ........................ ±2A - Single Pulse, 4μs Pulse Width ............................ ±5A - Single-Ended Voltage Range to ........................ +30V - Differential Voltage Range to ............................ ±15V .............................................. 2ns Risetime ................................. 1nA at 25º (Typ) ....................................... 3pF (Typ) ....................-40ºC to 105ºC Applications The SP720 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection to sensitive input circuits. The SP720 has 2 protection SCR/Diode device structures per input. A total of 14 available inputs can be used to protect up to 14 external signal or bus lines. Over-voltage protection is from the IN (pins 1-7 and 9-15) to V+ or V-. The SCR structures are designed for fast triggering at a threshold of one +V BE diode threshold above V+ (Pin 16) or a -V BE diode threshold below V- (Pin 8). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one V BE above V+. A similar clamp to V- is activated if a negative pulse, one V BE less than V-, is applied to an IN input. Standard ESD Human Body Model (HBM) Capability is: Input Protection Protection Pinout Functional Block Diagram V+ 16 1 8 2 3 - 7 9 - 15 IN IN IN V- RoHS Pb GREEN SP720 (PDIP, SOIC) TOP VIEW 14 15 16 9 13 12 11 10 1 2 3 4 5 7 6 8 IN IN IN IN IN IN V- IN V+ IN IN IN IN IN IN IN Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. SP720 Series 3pF 4kV Rail Clamp Array |
Số phần tương tự - SP720APP |
|
Mô tả tương tự - SP720APP |
|
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |