KTPFPGMEVMEUG datasheet(18/48 Pages) FREESCALE

tên linh kiện	KTPFPGMEVMEUG

Giải thích chi tiết về linh kiện	KITPFPGMEVME Programmer for PF Series Devices

PDF	48 Pages

Scroll/Zoom	100%

nhà sản xuất	FREESCALE [Freescale Semiconductor, Inc]

Trang chủ	http://www.freescale.com

Logo

18 / 48 page

KTPFPGMEVMEUG, Rev. 2.0

Freescale Semiconductor

Graphical User Interface Description

The KITPF0100GUI is a graphical user interface created to control the KITPF0100EPEVBE evaluation board as

well as to control any PF0100 based application board through the KITPFPGMEVME programmer. The GUI is

divided into tabs that can be selected to display a window associated with each functional aspect of the PF0100

device. Note that, depending on the device connected to the USB port, the GUI enables or disables sections that

are not accessible to an specific device. The following section describes only the tabs used to control a PF0100

device with the KITPFPGMEVME programming board.

6.1

Getting Started

1. Connect the PF Programmer to the target board using the 8-pin ribbon cable, then connect the USB cable

from the Mini-B USB port to the computer.

2. Press the “Open Session” button to search for the PF0100 Programmer device.

3. The “Select Resource” dialog box should pop up, and you should see the KITPFPGMEVME device listed.

The USB Vendor ID is 0x15A2, and the Part ID is 0x0050 for the KITPFPGMEVME.

Select the device and press the “OK” button.

Figure 17. OPEN USB Connection

KTPFPGMEVMEUG bảng dữ liệu(PDF) 18 Page - Freescale Semiconductor, Inc