AD7302

–4–

REV. 0

ORDERING GUIDE

Temperature

Package

Model

Range

Options*

AD7302BN

–40

°C to +105°C

N-20

AD7302BR

–40

°C to +105°C

R-20

AD7302BRU

–40

°C to +105°C

RU-20

*N = Plastic DIP; R = Small Outline; RU =Thin Shrink Small Outline.

ABSOLUTE MAXIMUM RATINGS*

°C unless otherwise noted)

AGND to DGND . . . . . . . . . . . . . . . . . . . . . . . –0.3 V, 0.3 V

Operating Temperature Range

Commercial (B Version) . . . . . . . . . . . . . –40

°C to +105°C

Storage Temperature Range . . . . . . . . . . . . –65

°C to +150°C

Junction Temperature . . . . . . . . . . . . . . . . . . . . . . . . . +150

°C

Plastic DIP Package, Power Dissipation . . . . . . . . . . 900 mW

θ

°C/W

Lead Temperature (Soldering, 10 sec) . . . . . . . . . . . +260

°C

TSSOP Package, Power Dissipation . . . . . . . . . . . . . 700 mW

θ

143

°C/W

Lead Temperature, Soldering

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . +215

°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220

°C

SOIC Package, Power Dissipation . . . . . . . . . . . . . . . 870 mW

θ

°C/W

Lead Temperature, Soldering

Vapor Phase (60 sec) . . . . . . . . . . . . . . . . . . . . . . . +215

°C

Infrared (15 sec) . . . . . . . . . . . . . . . . . . . . . . . . . . +220

°C

*Stresses above those listed under Absolute Maximum Ratings may cause perma-

nent damage to the device. This is a stress rating only; functional operation of the

device at these or any other conditions above those listed in the operational

sections of this specification is not implied. Exposure to absolute maximum rating

conditions for extended periods may affect device reliability.

WARNING!

ESD SENSITIVE DEVICE

CAUTION

ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily

accumulate on the human body and test equipment and can discharge without detection.

Although the AD7302 features proprietary ESD protection circuitry, permanent damage may

occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD

precautions are recommended to avoid performance degradation or loss of functionality.