ACPL-024L datasheet(5/11 Pages) AVAGO

5 / 11 page

Insulation and Safety Related Specifications

Parameter

Symbol

ACPL-M21L

ACPL-024L

ACPL-021L

Units

Conditions

Minimum External Air Gap

(Clearance)

L(101)

4.9

Measured from input terminals to output

terminals, shortest distance through air.

Minimum External

Tracking (Creepage)

L(102)

4.8

Measured from input terminals to output

terminals, shortest distance path along body.

Minimum Internal Plastic Gap

(Internal Clearance)

0.08

Through insulation distance conductor to

conductor, usually the straight line distance

thickness between the emitter and detector.

Tracking Resistance

(Comparative Tracking Index)

CTI

175

Volts

DIN IEC 112/VDE 0303 Part 1

Isolation Group

IIIa

Material Group (DIN VDE 0110, 1/89, Table 1)

IEC/EN 60747-5-5 Insulation Characteristics* (Option 060)

Description

Symbol

Characteristic

Unit

ACPL-M21L/

024L/021L

Installation classification per DIN VDE 0110/39, Table 1

for rated mains voltage ≤ 150 Vrms

I – IV

for rated mains voltage ≤ 300 Vrms

I – III

for rated mains voltage ≤ 600 Vrms

I – II

for rated mains voltage ≤ 1000 Vrms

Climatic Classification

55/105/21

Pollution Degree (DIN VDE 0110/39)

Maximum Working Insulation Voltage

VIORM

567

Vpeak

Input to Output Test Voltage, Method b*

VIORM x 1.875 = VPR, 100% Production Test

with tm = 1 sec, Partial discharge < 5 pC

VPR

1063

Vpeak

Input to Output Test Voltage, Method a*

VIORM x 1.6 = VPR, Type and Sample Test,

tm = 10 sec, Partial discharge < 5 pC

VPR

896

Vpeak

Highest Allowable Overvoltage

(Transient Overvoltage tini = 60 sec)

VIOTM

6000

Vpeak

Safety-limiting values – maximum values allowed in

the event of a failure.

Case Temperature

150

°C

Input Current**

IS, INPUT

150

Output Power**

PS, OUTPUT

600

Insulation Resistance at TS, VIO = 500 V

>109



Refer to the optocoupler section of the Isolation and Control Components Designer’s Catalog, under Product Safety Regulations section,

(IEC/EN 60747-5-5) for a detailed description of Method a and Method b partial discharge test profiles.

** Refer to the following figure for dependence of PS and IS on ambient temperature.

ACPL-024L bảng dữ liệu(PDF) 5 Page - AVAGO TECHNOLOGIES LIMITED

ACPL-024L bảng dữ liệu(HTML) 5 Page - AVAGO TECHNOLOGIES LIMITED

Html Pages

1 2 3 4 5 6 7 8 9 10 11

bảng dữ liệu tải về

Link URL