L6360 datasheet(55/65 Pages) STMICROELECTRONICS

tên linh kiện	L6360

Giải thích chi tiết về linh kiện	IO-Link communication master transceiver IC

PDF	65 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

55 / 65 page

L6360

Diagnostic LED sequence generator and driver

Doc ID 022817 Rev 2

55/65

7.2

IEC 61131-2 type 1 digital inputs

Two IEC61131-2 type 1 inputs are provided: one is available on C/QI (as per IO-Link

specification to support SIO mode) and one on the I/Q pin.

Both are provided with a programmable de-bounce filter (tdbq and tdbi, see Table 17 and

Table 23) to prevent false triggering.

Diagnostic LED sequence generator and driver

Each LED indication block can drive, through open drain output, one external LED.

LED drivers can be used for status or diagnostic information, or for other purposes, and

should be configured by the host microcontroller.

Two sequences of 16 bits can be programmed (through I2C) to generate user specific

sequences; each LED driver has two associated registers and turns the external LED on or

off according to the information stored in the registers, which are scanned at a rate of

63 ms per bit; total sequence time of each LED is approximately 1 s.

L6360 bảng dữ liệu(PDF) 55 Page - STMicroelectronics