| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
AFE8220TPZPQ1 bảng dữ liệu(PDF) 27 Page - Texas Instruments |
|
|
|
|||||||||||||||||||||||||||||
AFE8220TPZPQ1 bảng dữ liệu(HTML) 27 Page - Texas Instruments |
|
27 / 49 page ![]() Master Clock Oscillator R 1 AFE8220 MCLKI MCLKO C 2 C 1 1nF L1 L2 Crystal DVS 2 S 49 50 51 Real-Time Clock Oscillator AFE8220-Q1 www.ti.com....................................................................................................................................................... SBAS455A – JANUARY 2009 – REVISED JULY 2009 The master clock oscillator supports third-overtone designs from 55 MHz to 75 MHz. It can also support fundamental operations in the 20-MHz to 30-MHz range. The recommended third-overtone circuit for third-overtone operation is shown in Figure 17 and Table 11. Figure 17. Third-Overtone Operation Table 11. Third-Overtone Operation Recommendations FREQUENCY (MHz) C1 (pF) C2 (pF) L1 ( µH) L2 ( µH) R1 (kΩ) 55 3 10 0.1 4.7 6.8 60 5 10 0.82 3.3 4.7 65 4 10 0.68 2.7 3.3 70 5 10 0.56 2.7 3.3 75 3 10 0.56 2.2 3.3 The master clock oscillator may be optionally divided down to provide a reference clock on the REFCLK pin. Control variable refclk_en enables the generation of the reference clock when high. Two variables, refclk_hi and refclk_lo, define the high and low periods of REFCLK in terms of MCLK cycles. REFCLK is high for refclk_hi cycles of MCLK, then low for refclk_lo periods of MCLK. REFCLK frequency is limited to integer submultiples of MCLK. Table 12 shows the refclk operation control settings. Table 12. REFCLK Control Register Settings PARAMETER ADDRESS BITS refclk_en 1 13 refclk_hi 41 15:0 refclk_lo 40 15:0 The real-time clock oscillator supports crystals in the frequency range of 32.768 kHz through 150 kHz. The real-time clock module can be programmed to operate accurately with crystals in this frequency range. The real-time clock oscillator output may be optionally output on the RTC_OUT pin when rtc_oe is set high. This option allows the real-time clock oscillator to be used as an alternate reference clock in the event that an acceptable frequency cannot be derived from MCLK. Table 13 shows the rtc_oe control setting. Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 27 Product Folder Link(s): AFE8220-Q1 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |