| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
CS5464 bảng dữ liệu(PDF) 33 Page - Cirrus Logic |
|
|
|||||||||||||||||||||||||||||
CS5464 bảng dữ liệu(HTML) 33 Page - Cirrus Logic |
|
33 / 46 page ![]() CS5464 DS682F3 33 8.3 Page 1 Registers 8.3.1 DC Offset for Current (I1OFF , I2OFF ) and Voltage (V1OFF , V2OFF ) Address: 0 (I1OFF), 2 (V1OFF), 7 (I2OFF), 9 (V2OFF) Default = 0 DC offset registers I1OFF & V1OFF (I2OFF & V2OFF) are initialized to zero on reset. During DC offset calibration, selected registers are written with the inverse of the DC offset measured. The application program can also write the DC offset register values. These are two's complement values in the range of -1.0 value 1.0, with the binary point to the right of the MSB. 8.3.2 Gain for Current (I1GAIN , I2GAIN ) and Voltage (V1GAIN , V2GAIN ) Address: 1 (I1GAIN), 3 (V1GAIN), 8 (I2GAIN), 10 (V2GAIN) Default = 1.0 Gain registers I1GAIN & V1GAIN (I2GAIN & V2GAIN) are initialized to 1.0 on reset. During AC or DC gain calibration, selected register are written with the multiplicative inverse of the gain measured. These are unsigned fixed-point values in the range of 0 value 4.0, with the binary point to the right of the second MSB. 8.3.3 Power Offset (P1OFF , P2OFF ) Address: 4 (P1OFF ), 11 (P2OFF ) Default = 0 Power offset P1OFF (P2OFF) is added to instantaneous power and averaged over a low-rate interval to yield P1AVG (P2AVG) register results. It can be used to reduce systematic energy errors. These are two's complement values in the range of -1.0 value 1.0, with the binary point to the right of the MSB. 8.3.4 AC Offset for Current (I1ACOFF , I2ACOFF ) and Voltage (V1ACOFF , V2ACOFF ) Address: 5 (I1ACOFF), 6 (V1ACOFF), 12 (I2ACOFF), 13 (V2ACOFF) Default = 0 AC offset registers I1ACOFF & V1ACOFF (VACOFF & V2ACOFF) are initialized to zero on reset. These are added to the RMS results before being stored to the RMS result registers. They can be used to reduce systematic errors in the RMS results. These are two's complement values in the range of -1.0 value 1.0, with the binary point to the right of the MSB. MSB LSB -(20)2-1 2-2 2-3 2-4 2-5 2-6 2-7 ..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23 MSB LSB 21 20 2-1 2-2 2-3 2-4 2-5 2-6 ..... 2-16 2-17 2-18 2-19 2-20 2-21 2-22 MSB LSB -(20)2-1 2-2 2-3 2-4 2-5 2-6 2-7 ..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23 MSB LSB -(20)2-1 2-2 2-3 2-4 2-5 2-6 2-7 ..... 2-17 2-18 2-19 2-20 2-21 2-22 2-23 |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |