LSM330DLTR datasheet(39/54 Pages) STMICROELECTRONICS

tên linh kiện	LSM330DLTR

Giải thích chi tiết về linh kiện	Linear sensor module 3D accelerometer sensor and 3D gyroscope sensor

PDF	54 Pages

Scroll/Zoom	100%

nhà sản xuất	STMICROELECTRONICS [STMicroelectronics]

Trang chủ	http://www.st.com

Logo

39 / 54 page

LSM330DL

Registers description

Doc ID 022018 Rev 1

39/54

7.24

CTRL_REG1_G (20h)

DR<1:0> is used to set the ODR selection. BW <1:0> is used to set bandwidth selection.

The following table gives the frequencies for all combinations of the DR / BW bits.

Table 63.

CTRL_REG1_G register

DR1

DR0

BW1

BW0

Zen

Yen

Xen

Table 64.

CTRL_REG1_G description

DR1-DR0

Output data rate selection. Refer to

Table 65: DR and BW configuration setting

BW1-BW0

Bandwidth selection. Refer to

Table 65: DR and BW configuration setting

Power-down mode enable. Default value: 0

(0: power-down mode, 1: normal mode or sleep mode)

Zen

Z-axis enable. Default value: 1

(0: Z-axis disabled; 1: Z-axis enabled)

Yen

Y-axis enable. Default value: 1

(0: Y-axis disabled; 1: Y-axis enabled)

Xen

X-axis enable. Default value: 1

(0: X-axis disabled; 1: X-axis enabled)

Table 65.

DR and BW configuration setting

DR <1:0>

BW <1:0>

ODR [Hz]

cutoff [Hz]

100

12.5

100

200

12.5

200

400

110

800

110

LSM330DLTR bảng dữ liệu(PDF) 39 Page - STMicroelectronics

LSM330DLTR bảng dữ liệu(HTML) 39 Page - STMicroelectronics

Html Pages

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54

bảng dữ liệu tải về

Link URL