| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
Z8FS040 bảng dữ liệu(PDF) 17 Page - Zilog, Inc. |
|
|
|||||||||||||||||||||||||||||
Z8FS040 bảng dữ liệu(HTML) 17 Page - Zilog, Inc. |
|
17 / 56 page ![]() ZMOTION TM Detection and Control Family Product Specification PS028506-1110 PRELIMINARY 12 ADC Zilog’s PIR technology requires exclusive access to the ADC peripheral in order to detect motion. However, ADC conversions can be requested by the application through the API (PIR Status/Control Register 3). If it is necessary for the user application to utilize the ADC peripheral directly, the PIR engine must first be disabled via the PIR Engine Enable Register in the API. Motion detection is not possible while the PIR engine is disabled. When the user application is finished with the ADC peripheral, it must re-enable the PIR engine. 8 Pin Device: PA3 (ANA2) is reserved as the analog ADC input from the pyroelectric sensor. Therefore ANA2 is not available for user applications. Additionally ANA3 is used for second sensor input in dual pyro mode. All other channels are available to the user application. ADC Channel Available to Application 0 Yes 1 Yes 2 No 3 Only in Single Pyro Mode 20 Pin Device: PB2 (ANA2) is reserved as the analog ADC input from the pyroelectric sensor. Therefore ANA2 is not available for user applications. Also, ANA3 and ANA6 are not available since PB3 (ANA3) must be tied directly to PC2 (ANA6/ VREF). PC2 is configured as VREF output by the PIR engine. In dual pyro mode ANA3 is used for second sensor input – rather than being tied to VREF and therefore ANA6/ VREF becomes available. All other channels are available to the user application. ADC Channel Available to Application 0 Yes 1 Yes 2 No 3 No 4 Yes 5 Yes 6 Only in Dual Pyro Mode 28 Pin Device: PB2 (ANA2) is reserved as the analog ADC input from the pyroelectric sensor. Therefore ANA2 is not available for user applications. Also, ANA3 is not available since it is tied directly to PB5/ VREF. PB5 will be configured as VREF output by the PIR engine. In dual pyro mode ANA3 is used for second sensor input – rather than being tied to VREF and therefore PB5 becomes available. All other channels are available to the user application. ADC Channel Available to Application 0 Yes 1 Yes 2 No 3 No 4 Yes 5 Yes 6 Yes 7 Yes |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |