TEA1062N/TEA1062AN

LINEAR INTEGRATED CIRCUIT

UNISONICTECHNOLOGIESCO.,LTD

10 of 13

www.unisonic.com.tw

QW-R108-011.C

Fig.8 Supply arrangement

Fig.9 Typical current Ip available from Vcc peripheral circuitry with Vcc≧2.2V.

curve (a) is valid when the receiving amplifier is not driven or when MUTE =LOW (UTC TEA1062N is HIGH) .curve(b)

is valid when MUTE=HIGH(UTC TEA1062N is LOW) and the receiving amplifier is driven;

Vo(rms)=150mV,RL=150

Ω.The supply possibilities can be increased simply by setting the voltage drop over the

circuit VLN to a high value by means of resistor RVA connected between REG and SLPE.

7

6

MIC+

MIC-

(1)

7

6

MIC+

MIC-

13

9

7

6

MIC-

MIC+

(a)

(b)

(c)

Fig. 10 Alternative microphone arrangement

(a) Magnetic or dynamic microphone. The resistor marked(1) may be connected to decrease the terminating

impedance.

(b) Electret microphone.

(c) Piezoelectric microphone.