D201GLY datasheet(48/76 Pages) INTEL

48 / 76 page

Intel Desktop Board D201GLY Technical Product Specification

2.5.3

Fan Header Current Capability

CAUTION

The processor fan must be connected to the processor fan header, not to a chassis fan

header. Connecting the processor fan to a chassis fan header may result in onboard

component damage that will halt fan operation.

Table 22 lists the current capability of the fan headers.

Table 22. Fan Header Current Capability

Fan Header

Maximum Available Current

Processor fan

2 A

Rear chassis fan

1.5 A

2.5.4

Power Supply Considerations

CAUTION

The +5 V standby line for the power supply must be capable of providing adequate

+5 V standby current. Failure to do so can damage the power supply. The total

amount of standby current required depends on the wake devices supported and

manufacturing options.

System integrators should refer to the power usage values listed in Table 21 when

selecting a power supply for use with the board.

Additional power required will depend on configurations chosen by the integrator.

The power supply must comply with the following recommendations found in the

indicated sections of the ATX form factor specification.

•

The potential relation between 3.3 VDC and +5 VDC power rails

•

The current capability of the +5 VSB line

•

All timing parameters

•

All voltage tolerances

D201GLY bảng dữ liệu(PDF) 48 Page - Intel Corporation