8.2

Setting Up the ADS1246EVM-PDK

ADS1246EVM-PDK Kit Operation

www.ti.com

The ADS1246EVM-PDK contains both the ADS1246EVM and the MMB3 motherboard; however, the

devices are shipped unconnected. Follow these steps to set up the ADS1246EVM-PDK.

Step 1.

Unpack the ADS1246EVM-PDK kit.

Step 2.

Set the switches on the MMB3 as described below, as shown in Figure 6.

•

Set switch SW4 to the right.

•

Set the DAC switch (SW5) to the OUT position (to the right).

Figure 6. MMB3 Switch Locations

Step 3.

Plug the ADS1246EVM into the MMB3 as Figure 7 illustrates.

Figure 7. Connecting ADS1246EVM to MMB3

10

ADS1146EVM, ADS1246EVM, ADS1146EVM-PDK, ADS1246EVM-PDK

SBAU149A – June 2009 – Revised July 2009

Submit Documentation Feedback