Tel: 886-2-66296288

Fax: 886-2-29174598

URL: http://www.princeton.com.tw

PT2249A_PT2250A V2.6

- 23 -

May, 2007

Remote Control Receiver IC

PT2249A_PT2250A

Notes:

1. Controlling Dimensions: INCH

2. Dimensioning and tolerancing per ANSI Y14.5M-1982.

3. Dimension A, A1 and L are measured with the package seated in JEDEC Seating Plane Gauge

GS-3

4. D and E1 dimensions, for ceramic packages, include allowance for glass overrun and meniscus and

lid to base mismatch.

5. D and E1 dimensions for plastic packages, do not include mold, flash to protrusions. Mold flash or

protrusions shall not exceed 0.010 inch (0.25mm)

6. E and eA measured with the leads constrained to be perpendicular to plane T.

7. eB and eC are measured at the lead tips with the leads unconstrained. eC must be zero or greater.

8. N is the maximum number of terminal positions. (N=24).

9. Refer to JEDEC MS-011 Variation AA.

JEDEC is the registered trademark of JEDEC SOLID STATE TECHNOLOGY ASSOCIATION.