| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
dsPIC30F2011 bảng dữ liệu(PDF) 83 Page - Microchip Technology |
|
|
|||||||||||||||||||||||||||||
dsPIC30F2011 bảng dữ liệu(HTML) 83 Page - Microchip Technology |
|
83 / 206 page ![]() © 2008 Microchip Technology Inc. DS70139F-page 83 dsPIC30F2011/2012/3012/3013 11.0 INPUT CAPTURE MODULE This section describes the input capture module and associated operational modes. The features provided by this module are useful in applications requiring frequency (period) and pulse measurement. Figure 11-1 depicts a block diagram of the input capture module. Input capture is useful for such modes as: • Frequency/Period/Pulse Measurements • Additional Sources of External Interrupts Important operational features of the input capture module are: • Simple Capture Event mode • Timer2 and Timer3 mode selection • Interrupt on input capture event These operating modes are determined by setting the appropriate bits in the IC1CON and IC2CON registers. The dsPIC30F2011/2012/3012/3013 devices have two capture channels. 11.1 Simple Capture Event Mode The simple capture events in the dsPIC30F product family are: • Capture every falling edge • Capture every rising edge • Capture every 4th rising edge • Capture every 16th rising edge • Capture every rising and falling edge These simple Input Capture modes are configured by setting the appropriate bits, ICM<2:0> (ICxCON<2:0>). 11.1.1 CAPTURE PRESCALER There are four input capture prescaler settings specified by bits ICM<2:0> (ICxCON<2:0>). Whenever the capture channel is turned off, the prescaler counter is cleared. In addition, any Reset clears the prescaler counter. FIGURE 11-1: INPUT CAPTURE MODE BLOCK DIAGRAM Note: This data sheet summarizes features of this group of dsPIC30F devices and is not intended to be a complete reference source. For more information on the CPU, peripherals, register descriptions and general device functionality, refer to the “dsPIC30F Family Reference Manual” (DS70046). ICxBUF Prescaler ICx pin ICM<2:0> Mode Select 3 Note: Where ‘x’ is shown, reference is made to the registers or bits associated to the respective input capture channel (1 or 2). 10 Set Flag ICxIF ICTMR T2_CNT T3_CNT Edge Detection Logic Clock Synchronizer 1, 4, 16 From GP Timer Module 16 16 FIFO R/W Logic ICI<1:0> ICBNE, ICOV ICxCON Interrupt Logic Set Flag ICxIF Data Bus |
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |