| công cụ tìm kiếm bảng dữ liệu linh kiện điện tử |
|
SA56004GD bảng dữ liệu(PDF) 1 Page - NXP Semiconductors |
|
|
|||||||||||||||||||||||||||||
SA56004GD bảng dữ liệu(HTML) 1 Page - NXP Semiconductors |
|
1 / 36 page ![]() 1. General description The NXP Semiconductors SA56004X is an SMBus compatible, 11-bit remote/local digital temperature sensor with overtemperature alarms. The remote channel of the SA56004X monitors a diode junction, such as a substrate PNP of a microprocessor or a diode connected transistor such as the 2N3904 (NPN) or 2N3906 (PNP). With factory trimming, remote sensor accuracy of ±1 °C is achieved. Undertemperature and overtemperature alert thresholds can be programmed to cause the ALERT output to indicate when the on-chip or remote temperature is out of range. This output may be used as a system interrupt or SMBus alert. The T_CRIT output is activated when the on-chip or remote temperature measurement rises above the programmed T_CRIT threshold register value. This output may be used to activate a cooling fan, send a warning or trigger a system shutdown. To further enhance system reliability, the SA56004X employs an SMBus time-out protocol. The SA56004X has a unique device architecture. The SA56004X is available in the SO8, TSSOP8 and HVSON8 packages. SA56004X has 8 factory-programmed device address options. The SA56004X is pin-compatible with the LM86, MAX6657/8, and ADM1032. 2. Features I Accurately senses temperature of remote microprocessor thermal diodes or diode connected transistors within ±1 °C I On-chip local temperature sensing within ±2 °C I Temperature range of −40 °C to +125 °C I 11-bit, 0.125 °C resolution I 8 different device addresses are available for server applications. The SA56004ED with marking code 56004E, and SA56004EDP with marking code 6004E are address compatible with the National LM86, the MAX6657/8 and the ADM1032. I Offset registers available for adjusting the remote temperature accuracy I Programmable under/overtemperature alarms: ALERT and T_CRIT I SMBus 2.0 compatible interface, supports TIMEOUT I Operating voltage range: 3.0 V to 3.6 V I I2C-bus Standard-mode and Fast-mode compatible I SO8, TSSOP8 and HVSON8 packages I Programmable conversion rate (0.0625 Hz to 26 Hz) I Undervoltage lockout prevents erroneous temperature readings I Latch-up testing is done to JEDEC Standard JESD78 which exceeds 100 mA SA56004X ±1 °C accurate, SMBus-compatible, 8-pin, remote/local digital temperature sensor with overtemperature alarms Rev. 05 — 22 May 2008 Product data sheet |
Số phần tương tự - SA56004GD |
|
Mô tả tương tự - SA56004GD |
|
|
Link URL |
| Cho đến nay ALLDATASHEET có giúp ích cho doanh nghiệp của bạn hay không? [ DONATE ] |
Alldatasheet là | Quảng cáo | Liên lạc với chúng tôi | Chính sách bảo mật | Liên kết đến bảng dữ liệu | Trao đổi link | Tìm kiếm theo nhà sản xuất All Rights Reserved©Alldatasheet.com |
| Russian : Alldatasheetru.com | Korean : Alldatasheet.co.kr | Spanish : Alldatasheet.es | French : Alldatasheet.fr | Italian : Alldatasheetit.com Portuguese : Alldatasheetpt.com | Polish : Alldatasheet.pl | Vietnamese : Alldatasheet.vn Indian : Alldatasheet.in | Mexican : Alldatasheet.com.mx | British : Alldatasheet.co.uk | New Zealand : Alldatasheet.co.nz |
|
Family Site : ic2ic.com |
icmetro.com |