ADP1864AUJZ-R7 datasheet(43/75 Pages) AD

tên linh kiện	ADP1864AUJZ-R7

Giải thích chi tiết về linh kiện	ADSP-BF506F EZ-KIT Lite짰 Evaluation System Manual

PDF	75 Pages

Scroll/Zoom	100%

nhà sản xuất	AD [Analog Devices]

Trang chủ	http://www.analog.com

Logo

43 / 75 page

ADSP-BF506F EZ-KIT Lite Evaluation System Manual

2-9

ADSP-BF506F EZ-KIT Lite Hardware Reference

Push Button Enable Switch (SW3)

The push button enable switch (SW3) disconnects the associated push but-

ton circuit from the general-purpose I/O (GPIO) pins of the processor

and allows the signals to be used on the expansion interface.

ADC Enable Switch (SW4)

The ADC enable switch (SW4) disconnects the ADC from the SPORT1

interface of the processor and allows the ADC signals to be used on the

SD connector or the expansion interface.

CAN Enable Switch (SW5)

The CAN enable switch (SW5) disconnects the CAN transceiver from the

processor and allows the CAN signals to be used on the expansion

interface.

Reset Push Button (SW6)

The reset push button (SW6) resets the processor via a hardware reset. The

reset push button does not reset the on-board debug agent. The only way

to reset the debug agent is to cycle power.

Reserved

Boots through UART0 slave from host device

Table 2-5. Boot Mode Select Switch (SW2) (Cont’d)

SW2 Position

Processor Boot Mode

ADP1864AUJZ-R7 bảng dữ liệu(PDF) 43 Page - Analog Devices