ICS1893 datasheet(99/152 Pages) ICST

tên linh kiện	ICS1893

Giải thích chi tiết về linh kiện	3.3-V 10Base-T/100Base-TX Integrated PHYceiver?

PDF	152 Pages

Scroll/Zoom	100%

nhà sản xuất	ICST [Integrated Circuit Systems]

Trang chủ	http://www.icst.com

Logo

99 / 152 page

Chapter 8

Management Register Set

ICS1893 Rev C 6/6/00

June, 2000

ICS1893 - Release

8.13.8

Link Loss Inhibit (bit 18.1)

The Link Loss Inhibit bit allows an STA to prevent the ICS1893 from dropping the link in 10Base-T mode.

When an STA sets this bit to logic:

• Zero, the state machine behaves normally and the link status is based on the signaling detected Twisted-

Pair Receiver inputs.

• One, the ICS1893 10Base-T Link Integrity Test state machine is forced into the ‘Link Passed’state

regardless of the Twisted-Pair Receiver input conditions.

8.13.9

Squelch Inhibit (bit 18.0)

The Squelch Inhibit bit allows an STA to control the ICS1893 Squelch Detection in 10Base-T mode. When

an STA sets this bit to logic:

• Zero, before the ICS1893 can establish a valid link, the ICS1893 must receive valid 10Base-T data.

• One, before the ICS1893 can establish a valid link, the ICS1893 must receive both valid 10Base-T data

followed by an IDL.

ICS1893 bảng dữ liệu(PDF) 99 Page - Integrated Circuit Systems