SN75DP120

www.ti.com

SLLSE08 – OCTOBER 2009

Table 2. Transition Between Operational Modes (continued)

MODE TRANSITION

USE CASE

TRANSITION SPECIFICS

Output Disable Mode

DPCD register values correct to a valid register

1. Appropriate mode is re-entered

→ Any State

entry

PART NUMBER

PART MARKING

PACKAGE

SN75DP120RHHR

DP120

36-pin QFN reel (large)

SN75DP120RHHT

DP120

36-pin QFN reel (small)

(1)

For the most current package and ordering information, see the Package Option Addendum at the end of this document, or see the TI

ABSOLUTE MAXIMUM RATINGS

over operating free-air temperature range (unless otherwise noted)

(1)

VALUE / UNIT

VDD

–0.3 V to 4.0 V

Supply voltage range

VCC

–0.3 V to 4.0 V

Main Link I/O (INx, OUTx)

–0.3 V to VCC + 0.3 V

Main Link I/O (INx, OUTx) differential voltage

1.5V

HPD_SINK and CAD_SINK

–0.3 V to 5.5 V

Voltage range

HPD_SRC and CAD_SRC

–0.3 V to VCC + 0.3 V

Auxiliary (AUX_IN)

–0.3 V to 5.5 V

Control pins

–0.3 V to 4.0 V

11 kV

Electrostatic discharge

±1500 V

±200 V

Continuous power dissipation

See Dissipation Rating Table

(1)

Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings

only and functional operation of the device at these or any conditions beyond those indicated under recommended operating conditions

is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.

(2)

All voltage values, except differential voltages, are with respect to network ground terminal.

(3)

Tested in accordance with JEDEC Standard 22, Test Method A114-E

(4)

Tested in accordance with JEDEC Standard 22, Test Method C101-D

(5)

Tested in accordance with JEDEC Standard 22, Test Method A115-A

DISSIPATION RATINGS

PACKAGE

PCB JEDEC STANDARD

POWER RATING

Low-K

1250 mW

12.5 mW/°C

500 mW

36-pin QFN (RHH)

High-K

3095 mW

30.95 mW/°C

1238 mW

(1)

This is the inverse of the junction-to-ambient thermal resistance when board-mounted and with no air flow.

Copyright © 2009, Texas Instruments Incorporated

Submit Documentation Feedback

7

Product Folder Link(s): SN75DP120