HS-3000SLASH4M datasheet(5/46 Pages) BOSER

5 / 46 page

SSa

aafffe

eettty

yy IIIn

nnssstttrrru

uuccctttiiio

oon

nnsss

Integrated circuits on computer boards are sensitive to static electricity.

To avoid damaging chips from electrostatic discharge, observe the

following precautions:

Do not remove boards or integrated circuits from their anti-static

packaging until you are ready to install them.

Before handling a board or integrated circuit, touch an unpainted portion

of the system unit chassis for a few seconds. This helps to discharge any

static electricity on your body.

Wear a wrist-grounding strap, available from most electronic component

stores, when handling boards and components. Fasten the ALLIGATOR

clip of the strap to the end of the shielded wire lead from a grounded

object. Please wear and connect the strap before handle the

HS-3000/4M to ensure harmlessly discharge any static electricity

through the strap.

Please use an anti-static pad when putting down any components or

parts or tools outside the computer. You may also use an anti-static bag

instead of the pad. Please inquire from your local supplier for additional

assistance in finding the necessary anti-static gadgets.

NOTE:

DO NOT TOUCH THE BOARD OR ANY OTHER SENSITIVE

COMPONENTS WITHOUT ALL NECESSARY ANTI-STATIC

PROTECTION.

HS-3000/4M bảng dữ liệu(PDF) 5 Page - BOSER Technology Co., Ltd