16

Datalogging Sampling Rate

Press the TIMER key momentarily to display the datalogger’s sampling

rate (recording interval). The factory default interval is 0.05 seconds,

meaning that a reading will be logged every 5 hundredths of a second.

Press the UP or DOWN arrow key momentarily to select an alternate

sampling interval. Choose from 0.05 up to 480 seconds. Note that the

fastest sampling interval for Temperature and Resistance readings is 0.2

seconds; For Frequency it is 0.4 seconds; and for Capacitance it is 1

second. Press the TIMER key again to confirm the new setting.

The Sampling Rate cannot be changed while the meter is datalogging.

When a Sampling Rate of 20 seconds or longer is selected, the meter

enters a standby state between readings (to conserve battery life). While

in stand-by, the bargraph will continue to operate. To wake-up meter

from a stand-by state in order to view a real-time measurement, press

the SELECT key momentarily.

RS232C PC computer interface capabilities

This device is equipped with an optical isolated interface port located on

the rear of the meter. The data acquisition package includes an interface

cable and Windows

in the format of a digital meter, a analog meter, a comparator meter, and

a graphical display. Refer to the README file on the software disk for

further details.