14

Datalogging

Datalogging Basics

The ML720 can store up to 43,000 readings automatically. These

readings can be viewed on the LCD display or transferred to a PC using

the PC interface cable and Windows

Datalogging

Note: Each time the datalogging "Strt" process is initiated, existing data

will be erased. Always review or download stored data before beginning a

new recording session.

1. Press the

timer key to enter the sample rate mode. The default

setting is 0.05 seconds.

2. Press the up/down arrow keys to select the desired sample rate.

3. Press the

timer key to store the selected sample rate.

4. Press and hold the

"Strt, PAUS, StoP" key for 1 second until “Strt”

appears in the display to start the data logging process.

5. The bargraph display will appear with a single oscillating pointer to

indicate the datalogging process is in progress.

6. Press the

"Strt, PAUS, StoP" key to pause datalogging. A blinking

"H" will appear in the display.

7. Press

again to continue datalogging. "Cont" will appear momentarily

in the display.

8. Press the SELECT key to toggle between the measured value display

and the data list item number display.

9. Press and hold the

key for 1 second until “StoP” appears in the

display to stop the data logging process and store the data.